1 / 4
Print in Place Rising Ring Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little print in place experiment that turned into a sexy little ring box.
- Ocena
- 4 / 5
- Polubienia
- 104
- Pobrania
- 470
- Wydruki
- 1
- Wyświetlenia
- 4321
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (136)Powiązane
A little print in place container concept with a rising inner box I've been working on and plan to build upon further. To make it a bit more useful, I designed a small separate attachment you can add to make it pop…
After printing, push the lids up at the same time and push the inner box down until the built in supports come out.

Remove the supports and you're good to go.

If you print the ring attachment, I recommend PETG.