P1P Independent Gridfinity Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu P1P gridfinity faceplate which uses the corner hole on the P1P to stay in place. Optional variant with 3M strip.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a redesign of the Gridfinity Faceplate for Bambu P1P by Neebick on Printables:
https://www.printables.com/model/399054-gridfinity-faceplate-for-bambu-lab-p1p
After trying to attach that faceplate, I realized it wouldn't realistically be removable after, not to mention it was an impossibly tight fit.
I took everything right of the display portion, then entirely using the slicer, I extended the back. I did a lot of testing, several slices to split and rejoin the model (as I can't 3D model but can slice like a champ), and fit in the corner-plug from the P1P Arc enclosure.
This faceplate can fully attach via the corner plug on the P1P, as well it is the right size to fit in a top plate, such as for the Arc enclosure. As such, it is compatible with that enclosure.
There is a .3mf file which has a negative part for allowing additional support from a 3M strip, which I personally chose to use.