1 / 3
Remix of a Poop Chute Featuring Additional Support.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of a Poop Chute using large Magnets for Bambu Lab X1 Carbon that now includes additional support.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of an original Poop Chute design by @V3Precision_459757.
I printed his nice design but there did seem to be a weak point and this remix was intended to add some additional support to the suspected weak point. This additional support is the only change to the original design.
Print Parameters Used
- Model Filament: PLA
- Support - Yes; Normal (auto); unpainted supports for the magnet recesses.
- Support base: PLA (same as the model filament),
- Support interface: Support for PLA
- Layer - 0.28mm Extra Draft @BBL X1C
- Infill - 15%
- 3mf file using OrcaSlicer but would probably work fine with Bambu Studio