RINKY SLINKY RING STAND
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A curious slinky for holding rings, envelopes, SD Cards or anything else that is small, slim and needs to be kept tidy.
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 194
- Wydruki
- 3
- Wyświetlenia
- 1261
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This may or may not be an easy print to try! I was surprised that the first one I printed worked perfectly, and so did the second. I wasn't game to try a third!
I printed it vertically with no supports in PETG (recommended) with standard Prusa Slicer settings for QUALITY 0.2mm layer height and a 0.4mm nozzle.
The filament shown is Prusament Chalky Blue, but if you want to display jewellery, black, or any dark colour will be a good choice.
A tiny bit of post processing will be required if you printer settings are up to scratch. Simply (carefully) run a blade around the spiral to separate any small areas where the filament has stuck. That's it! Have fun!
