Extended Front Handguard with Side Rails For Sillybutt's Cynthia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
tis the front ported handguard extended
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Extended front handguard with rails that interfaces with the Swoopy furniture top back rail and railed muzzle. Hopefully the holes line up.
The holes should be aligned, but if not use a 3/32 drill bit to make new ones. it shouldn't affect it cosmetically.
Parts are uncut, cut them in your slicer if you cannot print it in one piece.
Requires a 12 inch threaded rod instead of the 8.5 inch threaded rod that comes by default. Also requires a bunch of 4-40 3/8 length screws that are normal slug hardware.
Barrel shown is a 16 inch barrel, enough to put on a slug suppressor scar.