1 / 3
USB-Stick-Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Box where you can store your USB-Sticks.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 155
- Wydruki
- 2
- Wyświetlenia
- 703
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (11)Powiązane
- Printed on an AnkerMake M5 (foundet it on Kickstarter)
- Used the eSUN PLA+ dark blue filament
- Used the AnkerSlicer with 15% infill, 100% flow/215 °C/60 °C plate temperature(initial layer: 120% flow/230 °C/65 °C plate)
- Layer height: 0,2 mm
- Speed: I printed it with 100 mm/s for the initial layer/Print speed at 250 mm/s!!!
- No supports needed
- No scaling (85x132x27 mm)
~ 4h19 print time
- 114 g filament