Sunshade for Ten Zone compound scope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ten Zone scope sunshade in 32 and 48 mm length (integrated shade is 16 mm only)
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 1232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon.
This sunshade is an easy to install accessory, no tool needed for mounting. It comes in right hand and left hand versions, with two length : 32 and 48 mm.
I tested it during several training, and it doesn't move at all.
If you want very strong fixation, alternate models with a screw hole instead of the “ball” insert is available. You will need a 10/32 screw and a nylon washer to protect the printed part.
Please note that the printed part is pretty thin and use a washer and thread locker (loctite 242 or similar) to secure the screw in place rather than overtighten and damage the part.
It can be printed without supports. For aesthetic condideration, Z seam position needs to be configured on an edge of the model before slicing.
If you find this model usefull, please give a like to support my work :)
Good shootings and have fun :)