Twinky Canopy for pan and tilt rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Twinky Canopy for pan and tilt rig
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I modified the canopy to fit a pan servo, and I added a mounting plane with screw holes to mount the Walksnail VTX to the top. By mounting the VTX outside you make more space for a larger battery beneath the canopy. I can fit a 4S 21700 lion in the front of the plane now. Also the VTX gets blazing hot, so having it outside helps to keep it cool. There are slots to accommodate the wires for the antenna, and the main cable assembly going to the flight controller. This will also fit a combined pan, and tilt rig too.
I printed this one with 10% cubic infill to make it stronger, because without infill it's a bit flimsy. This does add weight though, and it is already heavy with the servo and CAM mount. You can grab the CAM mount from my other files. I used Esun PLA+. I did not use supports, and you can see there is a spot underneath where the overhang did not print well. This print is not perfect, but it still works.