Brackets for mounting 40mm x 10mm Noctua Fan (NF-A40) on an Orange Pi 4 with the common "heatsink case".
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable brackets to upgrade the cooling of your Orange Pi 5 with Aluminum Heatsink "case".
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are 3D printable brackets for mounting a 40mm x 10mm Noctua fan (probably won't work with other brands) on an Orange Pi 5 A (maybe B also, IDK - definitely not Orange Pi 5 Plus) with the common AliExpress “aluminum heatsink case”.
Each STL is a pair.
There's one to be used brass inserts, the other is meant to be tapped with an m2.5 tap.
There's shouldn't need support. You may need to flip them over once inside your slicer.
They're part of this larger project.
https://imgur.com/a/jktVxuQ
I'll upload the rollbar case parts if anybody wants them.
