Walker amplified phone battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery cover
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a battery cover for a Walker W68-K-M amplified phone, may fit other models
There is a huge design flaw with the original battery cover which quickly leads to the clasp part breaking off. There is way too much pressure placed on it when closing the cover. This makes it difficult to remove, which is when the clasp normally breaks off
The replacement cover significantly reduces the pressure needed to close or open the cover. Hopefully these will last longer than the original
You will need the battery connector hardware from your broken cover, these easily slip off & on. Only takes 40mins on my printer, so even if/when they break it's a quick fix
Printed in PETG and print in the orientation shown in the stl