Mars 4 Max and Mars 4 DLP Build Plate Drip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mars 4 Max and DLP Build Plate Drip Mount V4
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 583
- Wydruki
- 6
- Wyświetlenia
- 2457
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an angled build plate drip mount for the Mars 4 Max. Printed and tested. The portion that fits over the Z axis mounting post is tight by design. The drip plate does not need to be removed between prints and the build plate fits in its working position while printing without interference from the drip mount. Thank you to u/redukt0r and u/wraith2626 on reddit for providing feedback on fitment.
Based on feedback, I have shortened the shaft 5mm to accommodate the Mars 4 DLP. I do not have this printer, so I have not personally tested this variant, though It is available for download. Enjoy :)