CyberSlime - a full sized table tennis paddle/racket based on CyberShape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Totally not Cybershape. Made with <3 by SolidSlime.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 202
- Wydruki
- 1
- Wyświetlenia
- 1128
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a for-fun project to make a light-weighted racket for my son. My main product is VR table tennis adapters, which can be found at https://VRPingPong.net .
Print 1 body and 2 sides, and then glue them.
Use infill and wall/top/bottom count as you desire.
The only one I've printed was printed flat, using 10% infill (probably too little) and it produces about half of the bounce of a Stiga Clipper CR. Beyond that I haven't done any more tests about how to make a good table tennis racket/blade. If you did, I'm interested to hear about it!
Have fun!