NFC 25mm Tag Holder, Amiibo - NTAG215
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small keychain sized holder for round 25mm NFC tags. See .zip file for PowerPoint template. FreeCAD file included
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 781
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Created to organize my Amiibo backups.
Important note on the cap, increase / decrease the X and Y scaling for the cap by 0.5% until the print firmly snaps into place. This is an interference fit and every printer is different. You should be able to slightly bend the holder base and the cap will pop out, but not too easily that the cap my fall off unintentionally. This way you can update the tag and label (if you're not backing up Amiibos and creating re-writable tags.)
See the .zip file for a PowerPoint template of the label layout. This .pptx was created in Libre Office for letter sized paper, 8.5" x 11" / A4. print no scaling.