BTT PiTFT70 Case - Brick space piece - klipperscreen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printable on ender3 size bed Only for the 7in piTFT model
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No print support needed
Screw and heat inserts are totally optional for the actual case and even screen, this can hold on it's own as is, just sliding the pieces together, and screen can just rest there (as long as there is no risk of it falling off a table).
But if you want it secured or super secured the option is there. you can use (6mm round magnet, max 3mm thick) magnets on the top.
Can be super secured (not very easily) and be completely lock down, with two not easily accessible screws that secure the backplate to the top.
To secure the screen you'll need M2.5x6 (or maybe m2.5x8)
---
There is a braket that shifts the pi to leave enough room for the usb cables
To secure the Pi and bracket you'll need M2.5x6 or M2.5x8
One screw hole is missing on purpose on the pi3/pi4 bracket as that screw would otherwise be under the GPIO and could risk an electric short.
---
the model posted is improved from my posted print ( I increased the screen area depth by 1mm to be fully flush )
---
BTT pi TFT70:
(will likely not work with other 7in screen)
aliexpress (affiliate link)
amazon US (affiliate link)
------
Support me on Patreon !
https://patreon.com/squirrelf3d
(STEP file of the model on my patreon, along with other projects )
or buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf