Hexagonal token bowls for board gaming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagonal, half-hex and third-hex bowls with thin walls to make best use of filament and a thick rim for rigidity.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 235
- Wydruki
- 6
- Wyświetlenia
- 1785
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Hexagonal, half-hex and third-hex bowls with thin walls to make best use of filament and a thick rim for rigidity.
They tessellate satisfyingly in a range of patterns.
Print instructions
I printed in PETG but PLA should work fine. The thin walls were designed for 0.2mm layer height to avoid gap fill.
Concentric infill gives a nice hex pattern in the base.
If you're feeling fancy, you can use a height-range modifier to set the range 14mm+ to 0.1mm layer height; that gives a smoother top rim. This is totally optional.
The attached gcode and 3mf is for one full hex, two half-hexes and 3 third-hexes.