The Owl House Archive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Archive from The Owl House
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 808
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
This is a model of the Archive from season 3 of The Owl House.
The model is 173mm wide, 180mm long and 90mm tall, but can be easily rescaled.
Print Instructions
Printed at 0.15mm layer height. Requires supports on buildplate.
The moon at the very top is messed up on my print. A drastic reduction in print speed for the final layers mitigates this.
There are two methods you can print this.
Seperate Pillars
The pillars along the side and the spikes on the underside are printed seperately.
The pillars connect without glue. The two spikes at the front will require glue.
I recommend using a raft for “print toh archive-pillar long x8”.
One Part
Everything is printed in one part. This is a difficult print. It requires more supports and it is very likely that some of the downwards facing spikes will break off while printing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
Update [2023-06-09]: New gcode-file, which hopefully fixes the problems I had with my print. Added a raft. Reduced speed for external perimeters on final layers.
Update [2024-02-15]: Added separate pillars version.