Replacement logo for Framework top cover (non official)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a non official replacement logo for the Framework 13" laptop's top cover.
- Ocena
- 4 / 5
- Polubienia
- 32
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 1763
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Customize or simply replace your Framework logo.
Removing the original logo is easy with some heat (heatgun, airdryer, ifixit style heat pouch, etc.) and a plastic (don't scratch the cover) prying tool. The original logo is some kind of hard vinyl with a layer of adhesive.
This model slightly protrudes from the case, where the original logo is much thinner and seats below the surface of the cover. You can try to modify the included fusion file to make it thinner, but in my experience, the result is too translucent.
It clips into the little holes in the cover (tested on the gen1 top cover, non CNC, I don't know if the holes are the same on the new CNC top cover). To make the logo clip into the holes, the tolerances are pretty tight, so I included the model if you need to fiddle the size of the pegs. Even between different filaments I had some hit and miss on the pegs.
I printed on a flat (non textured) PEI sheet to get a mirror finish.