Buffer tube sling point (nexus pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The nexus pro is devoid of any sort of sling point and I am planning on using it as a secondary to my Aeon pro.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 1082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The nexus pro is devoid of any sort of sling point and I am planning on using it as a secondary to my Aeon pro. While the Aeon pro is just as accurate (if not more during my testing) it isn't as consistent as the Nexus because it doesn't have a stock.
This sling point is compatible with the sling I currently own which you can find here https://outofdarts.com/collections/tactical-gear-loadout-2019/products/worker-mapgul-blaster-sling-two-colors but I would guess it works with other slings. let me know how it works for you and if you have any suggestions. This is the first published model I have done in Fusion 360 so let me know if there are any flaws or anything. Ps sorry the pics are upside down 😁😁😁
Print instructions
I did .3mm layer height with 15% infill. You will need a M3 nut and a square M3 bolt like in the prusa kits (I got mine from the spare parts bag! :) took less than forty minutes.
NOTE!!! I printed this in PLA the first time and it has cracked on the stress point. Please try in PETG or other strong material. I am working on fixing this problem :)