CNC 240v Relay and Outlet Box - Wall Mountable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, Wall Mountable, Aus spec, 240v Relay and Outlet Box for CNC Machines
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simple, Wall Mountable, 240v Relay and Aussie spec Outlet Box for CNC Machines.
I used a 2 wire Lever lock terminal screwed into the outside of the case with a self-tapping screw. The Fotek SSR-40DA relay can be mounted with M4 screws, which will self tap.
If you are using this to control a mains powered CNC spindle, set your GRBL max spindle rpm/speed to 1 and min speed to 0. If you don't do this, your CNC controller will try to use PWM control on your spindle and won't work as a result.
CAD file included for remixing.
NOTE: DIY electrical work is not legal in Australia, so please get a sparky to inspect your work to ensure it is safe.