1 / 3
Replica of Ral Partha Pegasus and Rider 01-017 — zdjęcie 1
1 / 3

Replica of Ral Partha Pegasus and Rider 01-017

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replica of a classic Ral Partha miniature, 01-017 from the "Personalities and Things that go Bump in the…

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
379
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replica of a classic Ral Partha miniature, 01-017 from the "Personalities and Things that go Bump in the Night" series. The spear was missing from my model, so I reconstructed it based on the photos linked below using Blender. The tail was broken on my model, and when I glued it on for scanning it seems I did it backwards. I have included a modified STL of the Pegasus with the tail on correctly.

A complete all-in-one STL is included, as well as individual files for the Pegasus, Rider, and Spear. The original model came with the wings also a separate piece, but I did not scan them separately.

See http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:RP-01-017v2.jpg

"Pegasus and Rider"

Note: I reused the wings of this model to scan https://www.thingiverse.com/thing:5963784

Reproduced using https://www.thingiverse.com/thing:1762299

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Supports:

Yes

Resolution:

0.1mm

Infill:

100%

Filament:

Hatchbox PLA

gray


Notes:

Most models should have Z axis set negative to make the bottom flat, but the rider should actually be floating above the build plate. All models require support.

Post-Printing =============

Closeup of the rider

Category: Scans & Replicas

Tagi