Ostrów Lednicki tactile plan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tactile plan of polish Holm located at Ostrów Lednicki
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Historical Context
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a convex plan of the Polish holm on Ostrów Lednicki, made as a test of 3d printing tactile plans and donated free of charge to the Museum of the First Piasts on Lednica, where it is on display. The idea is to show the layout of the holm and island to blind people.
The dimensions were adopted so that the entire surface of the MK3S+ bed could be used.
Print settings
The plan is intended for intensive viewing, so we recommend more durable, and in addition well detailed materials, we use ABS. A 0.4mm nozzle gives good results, probably using a 0.25mm nozzle would be even better, but due to the long print time we have not tested this.
The plan can be scaled up if one has a larger bed, the more the better. :)