T-Rex ribs 1-6 X1C 3mf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makerbot's T-Rex ribs 1-6 3mf file for Bambu X1C
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 595
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3mf file for Bambu X1C to print ribs 1-6 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over 0.16mm height so there won't be layer lines. Took 7+ hrs at standard speed. This file is for the right side ribs. Mirror them to print the left side ribs. I will upload a file for ribs 7-11 soon.
I personally used Inland Bone White PLA and calibrated it. I *think* you should be able to access my calibrated filament settings in this file if you're using the same filament as well.