T-rex ribs 7-11 X1C 3mf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu X1C 3mf file for printing Makerbot's T-rex fossil ribs 7-11
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3mf file for Bambu X1C to print ribs 7-11 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over 0.16mm height so there won't be layer lines. . This file is for the LEFT side ribs. Mirror them to print the right side ribs. I have a file for ribs 1-6 uploaded as well.
I personally used Inland Bone White PLA and calibrated it. I *think* you should be able to access my calibrated filament settings in this file if you're using the same filament as well.