Electric Toothbrush stand for 2 with Voronoi patterns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A toothbrush stand for 2 people with a single electric toothbrush and 2 heads, and voronoi pattern on the sides
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 116
- Wydruki
- 3
- Wyświetlenia
- 524
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this so that I could have one electric toothbrush, 2 heads and 2 toothbrush pastes in a single container.
The bottom part can be detached for cleaning.
In the picture you can see an old model, which I used anyway but it had issues with the toothbrush heads shelf. To solve that, in the current STLs, the shelf is flushed with the top.
After several month of usage, it's still appreciated by the people I gifted it.
Print instructions
For the bottom part, just print it with a lit of brim, to keep every corner down on the plate. No support is needed.
For the top part, it's easier if you print it upside down. You still need brim (5mm or more), but no support.