Sculpfun S6/S9 laser unit fixing screw add-on heads, in OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger locking screw heads for those with fat fingers!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Acknowledgements: This item is totally inspired by the splendid efforts of MXRR (see box below). Those items worked perfectly well - but I have big fat fingers and found them very fiddly!
Design: I modified the OpenSCAD code for my M3 nut screw heads (https://www.thingiverse.com/thing:2530144), enlarging it a bit and adding a cavity for the Sculpfun fixing screws.
At the moment they seem to work well - I have yet to prove whether they will get in the way on very large jobs, at the limits of the Y axis (not expected).
Note: If you want to play with the OpenSCAD code then you will have to download the library from ThingiVerse (https://www.thingiverse.com/thing:1305888). I renamed this library file to chamfer.scad for convenience.
08/02/2022 - LATE UPDATE! When I put these on my Sculpfun S9 I found that the top of the knob barely cleared the X-axis driveshaft - I have reduced the height by 1mm to give a little extra clearance.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.2 or 0.3
Infill:
30%
Filament: eSun PLA+ Fire Engine Red
Notes:
You may need to adjust either the code, or scaling, to get a nice tight fit onto the heads of the fixing screws - or make them an easy fit and use glue.
Category: Parts