Binocular Lens Cover in OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design to create replacement lens covers for binoculars.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a fairly elderly pair of binoculars that only had 3 lens covers - one had gone missing many years ago, and I finally decided that it was time to replace it.
This is a simple design with just 4 parameters: the diameter of the lens onto which the cover will fit; the height of the lens cover; the thickness of the cover's wall (which will ideally be a multiple of the printer's nozzle diameter); and the radius at the base.
I printed 4 caps using TPU filament, for flexibility and "grip" when on the binoculars.
Simply edit the OpenSCAD file and change the parameters to suit your binocular's lenses.
Print Settings
Printer:
Anycubic Kossel Plus
Rafts:
No
Supports:
No
Resolution:
0.2 or 0.3 (or whatever you prefer)
Infill:
20%
Filament:
Blue
Notes:
Basically, use whatever settings work best for you.
Category: Other