Tarmo 5 Main Gear Weight Reduction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weight reduced main gears for the Tarmo 5
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
These are some weight reduced gears I modified from the original gear design after looking in to printing the main gear and pinion in metal. This weight reduction knocked off almost $100 from the original quote on PCBWay.
In theory these should be just fine printed in plastic. There is a 4mm band in the center between the center mount and gear teeth.
Using the weight reduced gear with holes and identical settings I shaved off 4g (44g to 40g) in filament according to Cura. Nearly a 10% weight savings.
I have not tried these in my own Tarmo 5 yet. I'm still waiting for my current main gear to wear out before swapping.