1x3 Short Vase Mode Gridfinity Bin With Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shorter, simple vase-mode bin to hold things such as screws
- Ocena
- 4,5 / 5
- Polubienia
- 39
- Pobrania
- 390
- Wydruki
- 2
- Wyświetlenia
- 1505
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with a diameter of 6.05mm. And a STEP file has been included if you need to make the holes bigger.
Use the included gcode file for Ender 3 series printers to save you the hassle of finding the right slicer settings. This file is for a .5 nozzle but extrudes .8, so the temps are higher and the speed is a lot slower.
Print Settings:
- Vase Mode Enabled
- Bottom Layers: 28
- Extrusion Width: 0.8
- Temperature: 230
- Supports: None
- Speed: 30mm/s