HSW Neon LED Hex Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pieces to hold neon-style led strips on the Honeycomb Storage Wall
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These are pretty simple. They are small pegs that hold neon-style led lights onto the honeycomb storage wall. There are two options because the storage wall is not square, so going vertically and horizontally isn't really possible with one piece.
I personally printed them with clear PETG with the default settings for my printer. Since they are hardly noticeable, I didn't spend much time attempting to make them perfectly clear.
one last note, I normally like to share my files for creation but I somehow have lost the file in fusion that I created for this. Worst case if anyone needs the file I can remake the parts, they weren't very complicated.