1 / 2
French Fry Ring Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This customizable French Fry ring holder allows you to place rings on the fries!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This customizable French Fry box will keep your rings safe and easy to access!
The box features 12 slots for fries.
Print out as many different fries as you would like and place them into the box openings.
Then place your rings on the fries!
Printing Tips:
- I printed the twist fries vertically and the rest of the fries horizontally, so they are all support free.
- I printed the box upright.
- I used a brim on all parts.
- 0.2mm layer height. 20% infill.
Assembly Tips:
Part of each of the fries are straight. The straight part goes more easily into the slots than the curved part. A drop of glue could be placed onto the bottom of the fries to hold them in place if they are loose.
