CupFone Replacement Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement base for CupFone cell phone holder
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
A replacement base for the CupFone phone holder. A buddy broke his and it seemed easy enough for me to design and print a replacement. I made a couple refinements in the process. It's a bit taller and a two piece design that is meant to be glued together. Before gluing, you can add additional weight to the base. I made the four tubes big enough to hold US pennies, but you could add sand as well. I think I added some extra rigidity as well using three uprights instead of two on the original CupFone base.
This is the base only. You could print this CupFone top part here: https://www.printables.com/model/478231-horizontal-cupphone-holder-for-iphone-14-pro-max if you needed a new top part.
Printed in PETG, 0.3mm layer height for additional strength. Build plate supports for the top section.