1 / 6
Prusa SL1S Ring Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature Prusa SL1S printer to safely store your ring.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (33)Powiązane
It may have been forged in the fires of Mount Doom, but the only safe place for your precious is in the resin tank of a miniature Prusa SL1S printer.
NOTES:
- Support free, woo hoo!
- The build platform can be lowered or raised, and when it's completely lowered, the ring will be secured in the resin tank.
- On top of .stl files, I have include the .step files in a separate folder.
- I printed everything with a layer height of 0.2 mm and a speed of 50 mm/s.
- I wish I had translucent orange filament for the cover, but I don't :(
ASSEMBLY:
Assembly is very easy. You will need the parts Hook 1, Hook 2, Bar, and Knob to assemble the build plate/hook mechanism as seen in the photo to the right.
After you have the build plate/hook mechanism assembled, fit it into the slot in the top of the body.
Lastly, secure the cover to the body by using two pieces of 1.75 mm filament as hinge pins.