1 / 1
Blackview BL6000 pro car holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A specific smartphone holder for car compatible with any 4-Hole AMPS GPS interface (like Ram Mount or others make).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a BlackView BL6000pro smartphone holder for car. It need to be paired with a motorcycle interface mount.
Features :
- Designed to fit a BL6000 pro with a cheap silicon case with tight tolerances : It's easy to fit the phone on the holder, but it will not vibrate. if you have the proper silicon case with this design. (Note that there is a test part to verify one of the tolerance before printing the full part).
- Not designed for a BL6000 without silicon case.
- 4 mm thickness to have a sturdy design.
- 4-Hole AMPS GPS pattern to use mount on a GPS interface such as a Ram-Mount or SW-Motech etc.
- Holes to access to any button of the phone, and also for all the features to work well (microphone, speaker, usb-c socket).
The pictures depicted are on a 701 sm with a chinese GPS 4 screw mount. I also tried with a Ram mount AMPS interface and it work the same.
Parts / furnitures :
- ASA, ABS or PETG for the 2 main parts.
- 4 screws & 4 lock nut to lock the holder on the AMPS device.