Wooden Beast KNex coaster cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project is for the micro Knex roller coaster. It was designed to replace the crappy plastic car covers that the…
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This project is for the micro Knex roller coaster. It was designed to replace the crappy plastic car covers that the sets come with. With quick alteration this can have whatever front you want on it. The measurements are exact to fit the wheel base in mm. I used two other projects in this build to save time. They had wonderful projects that fit perfectly. If you print this, the holes for the screws need to be drilled into the base of the project for wheel mounting.
Edit 10/13/19 after getting a digital caliper I have added the holes for the screws. The updated file is meant for a 4 car setup using custom spacers and rubber bands for the connector. Also as you are going to add this topper there is a extended grove that holds the chain lift finger in place. It isnt important and can be clip to match the length of the other side.
How I Designed This
This was designed after the RMC Hybrid coaster trains that are now becoming super popular.
Category: 3D Printing
