1 / 1
Low Profile Drip Tray for Nespresso Breville Essenza Mini — zdjęcie 1

Low Profile Drip Tray for Nespresso Breville Essenza Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lower drip tray to allow using mugs with Breville Essenza Mini.

Ocena
5 / 5
Polubienia
67
Pobrania
515
Wydruki
11
Wyświetlenia
3023
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray.

  • In the previous design, drips would be trapped in between the tray cover and the tray. Expanded drip tray area further back, so drips from the machine end up in the basin of the tray.
  • The drip tray is a bit deeper to allow it to collect slightly more liquid.
  • The front curve is adjusted to more precisely match the original drip tray.
  • The back geometry is redesigned to better fit with the machine.
  • Edges for the base, inner drip tray, and the top of the back are curved for ease of cleaning and better aesthetics.

Printing instructions

0.15mm resolution, infill 15% gyroid. Supports required for the back, not the main tray. I used “Support on build plate only” in PrusaSlicer and used paint-on supports to block supports from the tray base, since it's not necessary for the angles used there.

Tagi