1 / 1
Screw mount for Zooz 700 Series Z-Wave Plus Open/Close XS Sensor ZSE41 — zdjęcie 1

Screw mount for Zooz 700 Series Z-Wave Plus Open/Close XS Sensor ZSE41

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sometimes double-stick tape doesn't hold up

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Compatible with Zooz 700 Series Z-Wave Plus Open/Close Sensor ZSE41 for Door, Window, and Gate Monitoring

…instead of using the double-stick tape to mount it, this mount requires two screws, and allows the sensor body to be slid up or the the side in order to remove it.

Print with PETG if your sensor is located where direct sunlight can hit it, or in an area that gets warm, such as garages.

Tagi