PARKSIDE POF 1200 D3 Suction Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An optimized replacement
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This model serves as a replacement for the original adapter. It is available in two variants: a faithful replica of the original design and an optimized version specifically tailored for printing. The optimized model accounts for reduced visibility caused by opaque printing materials, featuring an extended cut-out to enhance the view of the workpiece. The design eliminates the use of nuts, employing in-plastic threads instead. These, in conjunction with the threads on the router's base plate, function as a lock-nut.
The output is a cylindrical 35mm ID.
Installation
To get a tight seal between the routers base plate and the adapter, it's crucial to press the latter down when inserting the screws from the underside!
Print Instructions
The model will work best with PETG due to it's excellent layer adhesion , but ABS/ASA will be fine as well.