Grinch Christmas Ornament - MMU Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those of us who can't paint, I remixed the ornament to a multi-color version.
- Ocena
- 5 / 5
- Polubienia
- 125
- Pobrania
- 933
- Wydruki
- 10
- Wyświetlenia
- 4276
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
For those of us who can't paint, I remixed the ornament to a multi-color version.
The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little easier for the MMU2S to print.
Print instructions
There are some supports needed, but only for the whiskers on the side really. Switching to white always takes a lot of purge material so I recommend setting that value quite high. It's more wasteful to have to print the model twice than to have a purge value not high enough and have to print again. It's happened to me too many times.
This is the first time I used the "No sparse layers" on the purge tower. It worked well, saved a bit of filament and print time. The included GCODE file uses this. If you choose to use the included GCODE, the filament colors loaded are as follows:
1 - Light Green
2 - Dark Green
3 - Yellow
4 - Red
5 - White