Harry the Husky Dog - MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small dog painted into parts for multicolor printing.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 850
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
This is a dog I modeled, based off a stuffed dog, and colored into parts for a multicolor print in three colors of your choice.
- Extruder 1 - Chest legs, arm and face fur, inner ears, and tail (white or a light brown suggested)
- Extruder 2 - Back fur (dark gray or dark brown suggested)
- Extruder 3 - Nose, mouth, eyes, back of ears (black suggested)
The slicing screenshot for the included 3mf is for 8 dogs/objects in an 8 hour 43 minute print whic optimizes the number of tool changes. That uses a .6 nozzle, .3 layer height, 2 perimeter, 15% infill, and has the models already painted with the above three extruders. You could use this with a .4 nozzle and it will print, faster, or transfer this to a .4 nozzle setup. The size shown is 41mm tall at 100% size. No supports are needed.