Pokemon TCG Bits Case with VSTAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pokemon Trading Card Game case for holding coin, poisoned token, burned token and 12 health counter dice
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bits case for the Pokemon Trading Card Game.
The box can fit up to 12x 12mm health counter dice, 1x coin, 1x poisoned token, and 1x burned token. The lid doubles as a VSTAR card (taken from cosmiccat's design found here).
The box itself is about 66.3mm x 91.3mm and with the lid on 18.3mm deep and 93.3mm tall. This should put it inline with the size of most card sleeves, meaning the print should be able to fit into a deckbox with your cards.
The lid contains holes for 1mm tall x 3mm diameter magnets with the box containing holes for ferrous m2 countersunk screws. Can accommodate screws up to 10mm in length, but you only really need maybe 4mm at the most. Magnets in the lid should be glued in, but depending on your printer tolerances, it might also be able to just be friction fit instead.
For the example print shown, I used Inland PLA+ with all the recommended temp settings, 4 wall layers, and 20% gyroid infill.