Ball-joint robot toy "Ulfberhtmech"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated robot toy with ball-joint doll structure.
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 362
- Wydruki
- 3
- Wyświetlenia
- 2125
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an originally designed robot toy.
Elasticated cord is used to make the figure poseable in PLA, which is easy to print.
Approximately 27 cm in height.
_/_/_/_/_/_/ Change log_/_/_/_/_/_/
2023/06/01:
Submitted to Printables.
2023/05/31:
"lower leg_A_x2_with a slit.stl" was added.
This is the data with a slit that allows the lower leg_A to be attached after tying the strings during the leg assembly.
(v1.0.3)
2023/05/30:
Correction of "upper leg_L_Support required.stl" and "upper leg_R_Support required.stl” The range of motion has been reduced, but stability has been increased.
Old version included.
(v1.0.2)
2023/05/28:
Changed some parts of "hip.stl" to make it easier to print, Fixed an error in "body_Experimental.stl"
(v1.0.1)
2023/05/26:
Release
(v1.0.0)