1 / 7
NRG Systems IPU445 / Q3xxG4-P Case - 10 inch rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular case for a IPU445 Board with optional 10 inch rack mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
20 M3 heat inserts with H=4mm and some small screws are needed - The ones that came with the original rack case does fit.
The bottom and the right side have cutouts for SATA or other cables.
I highly recommend printing the top with the honeycomb pattern for ventilation. It's located right over the fan (if there is one).
There is also a 10 inch rackmount version.