Replacement kettle handle for Great Northern Popcorn poppers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement plastic handle on the popcorn kettle used in the Great Northern Popcorn (and other) popcorn makers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement handle for the poor-quality, and prone to breaking, injected molded plastic handle used on the Great Northern Popcorn kettles, and likely quite a few others from other vendors. It uses an embedded M8 nut to hold more reliably than the original with molded threads.
Suggest printing it out of PETG, ASA or ABS, as the popcorn maker can get hot enough to soften PLA. Just add a pause at the top of the opening for the nut, drop the nut in and continue the print.
Needs a standard M8-sized nut. (~12.5mm in diameter, 6.5mm in height – low profile ones will not work.)