Gridfinity Socket holders and Rachet Holders Stackable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these to be able to stack my sockets and to use one drawer instead of two.
- Ocena
- 3 / 5
- Polubienia
- 107
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 6938
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used the 1x5 dovetail socket rail and modified the length and also added one for ½" drive sockets. The rail base length uses a 11 grid base plate but you can use any size you want by changing the grid.
I added risers to be slid into the ends so you can stack the socket rails if you have a deep drawer and multiple sockets.
I added a stackable holder design for the rachets which mounts onto the dovetail rails.
The dovetail base rails are designed at 418mm long as I have a Kobra Max so I can print them in one piece on an angle.
To modify the length, you use the scale in your slicer on the X or Y axis depending on the orientation. Or import them into a cad software to modify them.
The numbers used in the file names are drive size (1-4, 3-8 1-2) and the last number is the heights of the risers.