1 / 5
Guitar with stand for birthday wish — zdjęcie 1
1 / 5

Guitar with stand for birthday wish

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guitar with a stand that can slide open. Inside you can glue a piece of paper with a birthday wish.

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
298
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The available space for the card is (h*w*d): 114.0 mm * 44.0 mm * 3.0 mm

I printed the guitar body in an angle of 45 degrees so in theory no support is needed. However due to the shape of the guitar, some support would help to keep everything nicely in place. By changing the support overhang angle to 40 degrees and only touching the buildplace, it will add support to the full body. If you use support blockers it can greatly be reduced. See attached pictures of how I added support.

Tagi