Among Us Bookmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bookmark shaped like a Crewmate with some VERY long legs.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Sussy Booka! With this bookmark, nobody will be suspicious that you haven't been keeping up with your reading!
This hilarious bookmark is multi-layered, meaning you can perform up to 4 (3 recommended) color changes to create a multi-colored model! Here's how you can arrange those color changes in PrusaSlicer, with an 0.1mm layer height:
Note that other layer heights are possible, but 0.1mm is recommended. You can also choose whatever main color for the body/legs you want. Go crazy with it!
Another note: the final white layer may be too small for the printer to feasibly print nicely. I recommend printing until the blue layer is finished, then stopping the print. It's barely noticeable and saves you a filament change.
Please check out my other bookmarks! The collection keeps growing! https://www.printables.com/@EvanRosenthal_491206/collections/671639
This is NOT an official Among Us product. This is a FREE 3D STL file meant to be downloaded from Printables.com. You should NOT sell anything produced from this file.