RCX 250 Slim Frame Spacer (Race Quad Copter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim frame spacer to build a basic but clean 250-class race quadrocopter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
- Importing to printables for old times sake
- If anyone still flies these 250 frames in 2023+, please let me know ;)Slim frame spacer to build a basic but clean 250-class race quadrocopter.
This spacer is designed for the "RCX H250CF-3K" frame (myrcmart.com) but could probably fit other frames like ZMR250 as well (not tested - check hole positions and dimensions before printing!).
Files include a full all-in-one print and seperated parts for smaller printers (4 pieces).
Additional hardware:
- 8x (or 12x) M3x20 bolts
- 4x (or 8x) M3x8 bolts
- 12x (or 20x) M3 (self locking) nuts
Parts I used to build the shown quad:
- Motors: DYS BE1806 2400KV (@ 5030/6025 Props)
- ESC: DYS BLHeli Opto 16A (Oneshot)
- FC: OpenPilot CopterControl 3D (CC3D) w/ CleanFlight
- Graupner GR-12L Receiver
- 5V Micro BESC
There is still plenty of room inside for activities :-)
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
100%
Notes:
Prints without support, i used 100% infill for stability.
How I Designed This ===================
This spacer is based on ideas from many other people, recreated to fit my needs.
Category: R/C Vehicles