Irrigation Emitter Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reproduced Irrigation Emitter Cap with additional configurations.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 2492
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I wanted to reduce the flow that my cheap 8way emitters were putting out. I bought a cheap 50pack knock off version of rain bird emitters (example in pictures). I have too many in the garden now though and can't get enough pressure so I set out to recreate the caps.
I have a low flow (never actually tested) version of the 360 degree 8 hole cap, a version with 2 holes plugged for a 225 degrees spray, and one with 3 holes plugged for a 180 degree spray. I also made a version with all 8 holes but made to only spray in 180 degrees.
I have a blank cap (no holes) in the files as well has the STEP and FreeCAD project file if anybody wants to make their own versions.
This will probably require a pretty well calibrated printer. I've only printed them so far on my Voron out of PLA. I tried to design them based off a 0.2 layer height so I'd recommend sticking to that or 0.1
(also uploaded on Thingiverse)