Sherpa and TBGS extruder mount for MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MK3S/+ extruder carriage for Sherpa Mini or TBGS extruder
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
IMPORTANT UPDATE!! Be sure to download the v2 version of the 90 degrees front cover, there was an issue with the fan location
This carriage will allow you to mount the Sherpa Mini Extruder or the TBGS extruder in your MK3S+, so you will have a lighter extruder which in combination with klipper and the input shape will allow you to print at higher speed without ghosting.
The PTFE lengts will be the following:
- Sherpa Mini + V6 -→ 43.7mm
- TBGS + V6 -→ 48.4mm
If you want to use another hotend you will need to recalculate the PTFE length.
Can be printed on PETG or ABS/ASA, I recommend ASA at least for the fan shroud as usual.
This model is based on the original E carriage from Prusa Research for the MK3S+ and the BEAREXXA from the Bear project