Unity Tactical Taps Seperator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seperating wall for Unity Tactical TAPS dual switch.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted something to help differentiate the buttons on my Unity Taps switch since I had several white light NDs when I started training with nods. White light NDs are very bad… This is a very small part but seems to help remind me which switch I'm on.
First model only fits real steel Unity Tactical TAPS switch that has a tapered hole in the middle. Second model fits Somogear, and should fit WASDN as well.
Printed from Esun PLA+, 100% infill, 6 walls. Printed 4 instances to help with heat issues. Print as loaded in STL.
Install is easy. Clean both surfaces with IPA, superglue in place and hold tightly for a couple minutes to get a good bond